Skip to main content

Robotbit Expension board

Import FutureBoard Library​

Import the Library to make use of its functions.

from future import *

11: RobotBit​

Import Robotbit Library​

import robotbit

1. Initiate a Robotbit Object​

rb=robotbit.RobotBit()

2. Motor Speed​

rb.motor(index,speed)

Parameter index indicates the port of motor, value range is 1~4. Parameter speed controls the speed, value range is -255~255.

3. Stop All Motors​

rb.motorStopAll()

4. Control Servos​

rb.servo(index,degree)

Parameter index indicates the servo port, value range is S1~S8. Parameter angle controls the angle, value range is 0~180.

5. Control GeekServo 9G Servos​

rb.geekServo9g(index,degree)

Parameter index indicates the servo port, value range is S1~S8. Parameter angle controls the angle, value range is -45~225.

6. Control GeekServo 2K Servos​

rb.geekServo2kg(index,degree)

Parameter index indicates the servo port, value range is S1~S8. Parameter angle controls the angle, value range is 0~360.

7. Twin Stepper Motors​

rb.stepperDual(degree1,degree2)

Parameters degree1 and degree2 control M1 and M2 respectively.

8. Single Stepper Motor​

rb.stepperDegree(index,degree)

Use index to select the motor port, value range is 1~2. Parameter degree controls the angle.