Flag Swiper

Use the arm to swipe down the flags on the opponent.

Building Instructions and Sample Programs

Building Instructions:

Sample Programs:

Flag Swiper-JoyFrog Controller

Flag Swiper-Microbit Controller

Flag Swiper-Robot

Sample Wiring

Operating the Robot

JoyFrog Controller:

1. The robot should show a red light and the controller should show a cross (X) when the power is switched on.
2. Press X to pair the robot, the robot should show a green light upon successful pairing.
3. Use the joystick for movement, A and B buttons for swiping left and right.

Microbit控制:

1. The robot should show a red light and the controller should show a cross (X) when the power is switched on.
2. Press A+B to pair the robot, the robot should show a green light upon successful pairing.
3. Use the accelerometer for movement, A and B buttons for swiping left and right.