Skip to main content

RoboCatcher

Use the shield to protect the resources from the oppoents, it can also avoid obstacles automatically.

Building Instructions and Sample Programs​

Building Instructions

RoboCatcher-JoyFrog Controller

RoboCatcher-Robot(Joyfrog Controller)

RoboCatcher-Microbit Controller

RoboCatcher-Robot(Microbit Controller)

Sample Wiring​

Operating the Robot​

JoyFrog Controller:​

  1. The controller should show a heart icon when the power is switched on.
  2. Use the joystick for movement, press A to put down the shield, press B to hold up the shield.
  3. Press X to switch to Obstacle Avoiding mode.
  4. Press Y to show the distance detected by the ultrasound sensor.

Microbit Controller:​

  1. The controller should show a heart icon when the power is switched on.
  2. Use the accelerometer for movement, press A to put down the shield and hold up the shield.
  3. Press B to switch to Obstacle Avoiding mode.。