Sugar - Ultrasonic Atomization Module

title: Sugar - Ultrasonic Atomization Module sidebar_position: 12

Introduction

Function

---

Convert water to mist to increase humidity

Signal :Digital input 1 (High level): Turn on the humidifier 0 (Low level): Turn off the humidifier

Module principle

Ultrasonic atomizer uses electronic high-frequency oscillation (oscillation frequency is 1.7MHz or 2.4MHz, which is beyond the hearing range of human beings. This electronic oscillation is harmless to human beings and animals). Through the high-frequency resonance of the ceramic atomizing sheet, the liquid water molecular structure is broken up to produce natural and elegant water mist, without heating or adding any chemical reagents. Compared with the heating atomization method, energy is saved by 90%. In addition, a large number of negative ions will be released during the atomization process, which will produce electrostatic reaction with smoke, dust, etc. floating in the air, making them precipitate, and can also effectively remove harmful substances such as formaldehyde, carbon monoxide, and bacteria, so as to purify the air and reduce the occurrence of diseases.

Wiring

		Future Board Lite Interface	Wire
	Sugar Cube Ultrasonic Atomization Module	Port3	White PH2.0-3Pin Interface Wire

warning
Supports connecting to Port1, Port2, Port3, Port4 Pay attention that the interface is consistent with the actual when programming.

Building Block - Function Description

Sequence	Building Block Image	Building Block Function
1		Control the switch of the external atomization module

Program - Full Program

Program - Function description

Set the color screen to dot matrix mode If press key A on Maqueen Lite, wait for release, display icon, open atomization module If press key B on Maqueen Lite, wait for release, display icon, close atomization module

Using Kittenblock

Run the program offline to check the effect

Usage on Microbit

Coding platforms

Microsoft MakeCode for micro:bit Using Makecode coding platform

Add Sugar plug-in

Search for Sugar in extensions, click Add

Circuit Connection

		Microbit Interface	Wire
	Sugar Ultrasonic Fogging Module	P0	White PH2.0-3Pin Interface Wire

warning Support connecting to P0, P1, P2, P8, etc. When programming, make sure the interface matches the actual one.

Building Block - Function Description

Sequence	Building Block Image	Building Block Function
1		Control the switch of the atomization module

Case: Button Control