Skip to main content



Q1: Does the module support hot plug? Will hot plug damage the module?

A1: Yes, hot plug will not damage the module or the main board

Q2: Can I use Jacdac with MicrobitV1.5?

A2: No, it is not supported. It must be V2 or above.

Q3: Why can't makecode recognize the Jacdac module when it is plugged in?

A3: Please load the Jacdac extension plug-in and then download an empty program.

Q4: Do I need to distinguish the ports when plugging in the modules?

A4: No, any Jacdac port can be used